Check valve installation manual

KEYSTONE FIGURE 85/86 CHECK VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS FLANGE AND PIPE COMPATIBILITY Check matching of flange drilling pattern of pipe and valve body outside diameter before assembly. Flange face which contacts valve body has to be flat and without any scratches or other damage. The figure 85 is a check valve of a. The Flomatic ® Flo-Flex ® Model Swing Check Valve has been designed to give years of trouble-free operation during normal operation. This OM owners’ manual will provide you with the information you need to properly install and maintain the valve and to ensure a long service life. The Flo-Flex ® check valve is opened automatically by the. Before installation, check the valve name plate and valve body information to ensure the valve is suitable for the intended service. Before installation, remove the flange cover and the protective film on the flange sealing face, inspect the bore and the flange sealing surface, remove any dirt with a clean soft cloth, use.

to installation. The valve should be inserted fully into the pipe so that no part of. the cuff or bill extends outside the pipe. Ensure that the valve is not slanted at an angle with the bill pointing upwards or downwards. The valve centerline should be parallel to the pipe centerline. Tideflex ® Technologies recommends pinning the CheckMate ® Valve. Check valve can be installed in horizontal or vertical piping runs, with the flow running upward. Mounting for vertical installations is critical. See examples below. Check Valve Installation Instructions WARNING FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed and qualified in pool. Inspection. Prior to installation, inspect valves for any damage. Refer to Check-All Valve® Terms and Conditions Form # for warranty information. Flow arrows. Install each check valve in the line with the arrow pointing in the direction of the flow. To verify proper installation, make sure each valve opens in the direction of desired flow.

You can easily install a shower valve with SharkBite once you understand how to prepare the pipes. Then, they simply push and lock into the SharkBite fitting. SharkBite is a brand of push-to-connect fittings for plumbing. The main benefits. The Exhaust Gas Recirculation (EGR) valve on the Vehicles is an important part of the engine emissions system. The EGR valve allows a precisely metered amount of exhaust gas to be circulated back to the combustion chamber. This introduction. Solenoid valves are used to replace manual valves so they can be controlled remotely valve, according to Crane Engineering. The electronic controls in the solenoid valve are what makes it possible to control it this way.